Next: Running OASIS3 in interpolator-only
Up: Compiling and running with
Previous: Running the TOYCLIM coupled
Running the TOYCLIM coupled model manually
If you want to run the TOYCLIM manually, you need to copy the
following files in your working directory:
- OASIS3, toyatm, toyoce, toyche executables
- OASIS3 grid, restart, and auxiliary files: grids.nc, masks.nc,
areas.nc, SOALBEDO.nc, flda1.nc, flda2.nc, flda3.nc,
flda4.nc, fldo1.nc, at31topa, runoff31, which are in
prism/data/toyclim
/input_toyclim_standard_standard_prism_2-2.tar.gz
- OASIS3 adjunct files `cf_name_table.txt' and `namcouple' which can be
found under names
`cf_name_table.txt' and
`namcouple_toyclim_use' in prism/util/running/adjunct_files
/oasis3
Then you need to start the coupled model, setting up MPI parameters
properly. For examples, refer to files config_site_<node>.h and
launching_toyclim_<node>.h in prism/util/running
/frames/include_<node> (where <node> is the
name of the platform).
Reinhard Budich
2004-12-22